INA SL192330-TB-BR-XL-C3
Price: 3,418.72 $
Specifications
| Brand | INA |
| Item Number | SL192330-TB-BR-XL-C3 INA |
| Also known as |
SL192330-TB-BR-C3 |
| Category | Cylindrical Roller Bearing Single Row |
| Inner (d) MM | 150 |
| Outer (D) MM | 320 |
| Width (B) MM | 108 |
| Inner (d) Inch | 5.9055 |
| Outer (D) Inch | 12.5984 |
| Width (B) Inch | 4.252 |
| Weight (kg) | 42.5 kg |
| Bore | C - Cylindrical Bore |
| Seal | No Seal |
| Cage Type | FC - Full Complement, No Cage |
| External Modification | No External Modification |
| Radial Internal Play | C3 Internal Play (Higher than Cn) |
| Precision | BR - Black Finishing |
| Heat Stabilization | No Heat Stabilization - Temperatures up to 120 °C |
| TB | In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower |
| BR | Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race |
| XL | X-Life |
| C3 | Internal Clearance Larger Than Normal |
FAG 22330-E1A-XL-M-C4
41 kg
150x320x108 mm
FAG 22330-E1A-XL-K-M
41.2 kg
150x320x108 mm
FAG 22330-E1-XL-C3
39.5 kg
150x320x108 mm
FAG 22330-E1-XL-K-C3
40.77 kg
150x320x108 mm
FAG 22330EDK-C4
40.8 kg
150x320x108 mm
FAG 22330-E1-XL-K
40.77 kg
150x320x108 mm
FAG 22330-E1-XL-K-C4
40.8 kg
150x320x108 mm
FAG 22330-E1A-XL-M
41 kg
150x320x108 mm
FAG 22330-E1-K
40.77 kg
150x320x108 mm
FAG 22330-E1-XL-K-C2
40.77 kg
150x320x108 mm
FAG 22330-E1-XL-K-T41A
40.8 kg
150x320x108 mm
FAG 22330-E1-XL-C4
39.5 kg
150x320x108 mm
FAG 22330-E1A-XL-M-C3
41.96 kg
150x320x108 mm
FAG 22330-E1-XL-T41A
39.5 kg
150x320x108 mm
FAG 22330-E1-XL
39.5 kg
150x320x108 mm
FAG 22330-E1A-XL-MA-T41A
41 kg
150x320x108 mm
Timken 22330KYMW33W800C4
41.2 kg
150x320x108 mm
Timken 22330KEJW33C3
40.77 kg
150x320x108 mm
SKF 22330CCKJA/W33VA405
40.8 kg
150x320x108 mm
SKF 22330CCK/C3W33
40.77 kg
150x320x108 mm
SKF 22330CC/W33
39.5 kg
150x320x108 mm
Timken 22330KYMW33
41.2 kg
150x320x108 mm
Timken 22330KCJW33
40.77 kg
150x320x108 mm
SKF 22330CC/C3W33
39.5 kg
150x320x108 mm
SKF 452330M2/W502
40.8 kg
150x320x108 mm
Timken 22330EMBW33C3
41.96 kg
150x320x108 mm
SKF 22330CCK/W33
40.77 kg
150x320x108 mm
SKF 22330-2CS5K/VT143
40.77 kg
150x320x108 mm
SKF 22330CC/C4W33
39.5 kg
150x320x108 mm
RHP 22330EMBW33
41 kg
150x320x108 mm
NTN 22330EMD1C3
41.96 kg
150x320x108 mm
NSK 22330CAME4S11
41 kg
150x320x108 mm
NTN 22330EMD1
41 kg
150x320x108 mm
NTN 22330B L1 K D1
41.2 kg
150x320x108 mm
NSK 22330CAMK E4 C3 S11
41.2 kg
150x320x108 mm
NTN 22330EMKD1C3
41.2 kg
150x320x108 mm