INA SL1829/630-TB-BR-IR/T-CN/3H
Price: 0.00 $
Specifications
| Brand | INA |
| Item Number | SL1829/630-TB-BR-IR/T-CN/3H INA |
| Manufacturer Part Number | 0774076100506 |
| EAN | 4047643158640 |
| Category | Cylindrical Roller Bearing Single Row |
| Inner (d) MM | 630 |
| Outer (D) MM | 850 |
| Width (B) MM | 128 |
| Inner (d) Inch | 24.8031 |
| Outer (D) Inch | 33.4646 |
| Width (B) Inch | 5.0394 |
| Weight (kg) | 200 kg |
| Bore | C - Cylindrical Bore |
| Seal | No Seal |
| Cage Type | FC - Full Complement, No Cage |
| External Modification | No External Modification |
| Radial Internal Play | Int. Play Upper Half C3 Range |
| Precision | BR - Black Finishing |
| Heat Stabilization | No Heat Stabilization - Temperatures up to 120 °C |
| TB | In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower |
| BR | Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race |
| IR/T | Grooves In Inner Ring Are On The Side Of The Circlip |
| CN/3H | |
| CN | Normal Radial Internal Clearance |
| /3H | Clearance Range Corresponding To The Upper Half Of The Actual Clearance Range |
NSK NCF29/630VCC
205 kg
630x850x128 mm
INA SL1829/630-A
205 kg
630x850x128 mm
FAG NU29/630M
220 kg
630x850x128 mm
RKB NCF29/630VC NR A ZB
205 kg
630x850x128 mm
FAG NU29/630-E-M1A-C3
220 kg
630x850x128 mm
FAG NUP29/630-E-M1A
230 kg
630x850x128 mm
INA SL1829/630-B
205 kg
630x850x128 mm
FAG NU29/630-E-M1A
220 kg
630x850x128 mm
INA SL1829/630-B-C3
205 kg
630x850x128 mm
FAG NJ29/630-E-M1
213.9 kg
630x850x128 mm
IDC/Interprecise Donath GmbH NCF29/630V
205 kg
630x850x128 mm
NSK NCF29/630/S/VCCG3-01
205 kg
630x850x128 mm
KIS NCF29/630V
205 kg
630x850x128 mm