INA SL1828/800-TB-N2-BR-CN/3L
Price: 0.00 $
Specifications
| Brand | INA |
| Item Number | SL1828/800-TB-N2-BR-CN/3L INA |
| Manufacturer Part Number | 0862593930404 |
| EAN | 4054371087401 |
| Category | Cylindrical Roller Bearing Single Row |
| Inner (d) MM | 800 |
| Outer (D) MM | 980 |
| Width (B) MM | 106 |
| Inner (d) Inch | 31.4961 |
| Outer (D) Inch | 38.5827 |
| Width (B) Inch | 4.1732 |
| Weight (kg) | 164 kg |
| Bore | C - Cylindrical Bore |
| Seal | No Seal |
| Cage Type | FC - Full Complement, No Cage |
| External Modification | N2 - 2 Locking Groove in Outer Ring |
| Radial Internal Play | Lower Half Of C3 Range |
| Precision | BR - Black Finishing |
| Heat Stabilization | No Heat Stabilization - Temperatures up to 120 °C |
| TB | In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower |
| N2 | Two Locating Slots (Notches) 180° Apart In One Outer Ring Side Face Or Housing Washer |
| BR | Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing |
| CN/3L | |
| CN | Normal Radial Internal Clearance. + |
| /3L | Clearance Range Corresponding To The Lower Half Of The Actual Clearance Range |
INA SL1828/800-TB-BR
165 kg
800x980x106 mm
INA SL1828/800-A-REC
165 kg
800x980x106 mm
INA SL1828/800-A
165 kg
800x980x106 mm
SKF NCF28/800V
165 kg
800x980x106 mm
INA SL1828/800-BR-E-SN508
165 kg
800x980x106 mm
INA SL1828/800-A-N1-BR-SP5-CN/3L-IT
164 kg
800x980x106 mm
INA SL1828/800-E-BR-CN/3L
164 kg
800x980x106 mm
INA SL1828/800-E-BR
165 kg
800x980x106 mm
SKF NCF28/800V/VQ646
165 kg
800x980x106 mm
SKF NCF28/800V/L4BCNL
165 kg
800x980x106 mm
Neutral NCF28/800V
165 kg
800x980x106 mm