INA SL182232-TB-BR-C3-2S
Price: 0.00 $
Specifications
| Brand | INA |
| Item Number | SL182232-TB-BR-C3-2S INA |
| Category | Cylindrical Roller Bearing Single Row |
| Inner (d) MM | 160 |
| Outer (D) MM | 290 |
| Width (B) MM | 80 |
| Weight (kg) | 23 kg |
| Bore | C - Cylindrical Bore |
| Seal | No Seal |
| Cage Type | FC - Full Complement, No Cage |
| External Modification | No External Modification |
| Radial Internal Play | C3 Internal Play (Higher than Cn) |
| Precision | BR + 2S |
| Heat Stabilization | No Heat Stabilization - Temperatures up to 120 °C |
| ECLASS number | 23-05-09-01 |
| ECLASS2 number | 23-05-09-01 |
| TB | In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimized And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower |
| BR | Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race |
| C3 | Internal Clearance Larger Than Normal |
| 2S | Bearings Matched In Set Of Two For Side-By-Side Mounting, Tolerance Is Matched Based On The Inner, Outer And Clearance Of The Bearing |
FAG 22232-E1-XL-K-C3
21.56 kg
160x290x80 mm
FAG 22232-E1-C3
22 kg
160x290x80 mm
FAG 22232-E1-XL-K
21.56 kg
160x290x80 mm
FAG 22232-E1-XL-C4
22 kg
160x290x80 mm
FAG 22232-E1-XL
22 kg
160x290x80 mm
FAG 22232-E1A-XL-M
22.7 kg
160x290x80 mm
FAG 22232-E1A-XL-K-M-C4
22 kg
160x290x80 mm
FAG 22232-E1-XL-K-C4
21.56 kg
160x290x80 mm
FAG 22232-E1A-XL-K-M
22 kg
160x290x80 mm
FAG 22232-E1A-XL-K-M-C3
22 kg
160x290x80 mm
SKF 22232-2CS5/VT143
22 kg
160x290x80 mm
SKF 22232CCK/W33
21.56 kg
160x290x80 mm
RHP 22232EKM W33
22 kg
160x290x80 mm
SKF 22232CCK/C3W33
21.56 kg
160x290x80 mm
Timken 22232YMW33
22.7 kg
160x290x80 mm
SKF 22232CC/W33
22 kg
160x290x80 mm
SKF 22232CCK/C4W33
21.56 kg
160x290x80 mm
Timken 22232EJW33
22 kg
160x290x80 mm
Timken 22232EMW33C4
22.7 kg
160x290x80 mm
Koyo (JTEKT) 22232RW33FY
22.7 kg
160x290x80 mm
NSK 22232CDK E4 S11
21.56 kg
160x290x80 mm
NTN 22232B L1 K D1 X50 C3
22 kg
160x290x80 mm
NSK 22232CDKE4S11
21.56 kg
160x290x80 mm
Nachi 22232EW33 C3
22 kg
160x290x80 mm
NKE 22232-E-C3-W33
22 kg
160x290x80 mm
NSK 22232CAMKE4C3S11
22 kg
160x290x80 mm
NTN 22232EA D1 C3
22 kg
160x290x80 mm
NSK 22232CDKE4C3S11
21.56 kg
160x290x80 mm
Rollway 22232GMEX K C3 W33
22 kg
160x290x80 mm
URB 22232MBW33C3
22.7 kg
160x290x80 mm
MPZ Minsk Bearing Plant 22232W33
22 kg
160x290x80 mm
MPZ Minsk Bearing Plant 22232MB W33 C3
22.7 kg
160x290x80 mm
URB 22232 CW33C3
22 kg
160x290x80 mm
MPZ Minsk Bearing Plant 22232K W33
21.56 kg
160x290x80 mm
ZWZ 22232CAC3W33
22.7 kg
160x290x80 mm
FAG 22232SK-MB
22 kg
160x290x80 mm