INA SL1818/600-E-TB-BR
Price: 0.00 $
Specifications
| Brand | INA |
| Item Number | SL1818/600-E-TB-BR INA |
| Manufacturer Part Number | 0606113160000 |
| EAN | 4047643060493 |
| Category | Cylindrical Roller Bearing Single Row |
| Inner (d) MM | 600 |
| Outer (D) MM | 730 |
| Width (B) MM | 60 |
| Weight (kg) | 51.5 kg |
| Bore | C - Cylindrical Bore |
| Seal | No Seal |
| Cage Type | FC - Full Complement, No Cage |
| External Modification | No External Modification |
| Radial Internal Play | Cn Normal Internal Play |
| Precision | BR - Black Finishing |
| Heat Stabilization | No Heat Stabilization - Temperatures up to 120 °C |
| Width (b) mm | 60 |
| Basic static load rating, radial (C 0r) | 2800000 |
| Limiting speed (n G) | 450 |
| Reference speed (n u03d1r) | 265 |
| ECLASS number | 23-05-09-01 |
| ECLASS2 number | 23-05-09-01 |
| E | Increased Load Capacity |
| TB | In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower |
| BR | Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race |
FAG 618/600-MA-C4
52.8 kg
600x730x60 mm
FAG 618/600-M-C3
52.8 kg
600x730x60 mm
FAG 618/600-M
52.8 kg
600x730x60 mm
FAG 618/600-MA
52.8 kg
600x730x60 mm
SKF 618/600MA/C3
52.8 kg
600x730x60 mm
FAG 618/600MA-C4
52.8 kg
600x730x60 mm
FAG 618/600M
52.8 kg
600x730x60 mm
FAG 618/600-MA-C3
52.8 kg
600x730x60 mm
SKF 618/600MA
52.8 kg
600x730x60 mm
SKF 618/600MA/C4
52.8 kg
600x730x60 mm
RKB 618/600MB C3
52.8 kg
600x730x60 mm
FAG 618/600-MA-R500-550-J15P
52.8 kg
600x730x60 mm
FAG 618/600-MA-C5
52.8 kg
600x730x60 mm
NSK 68/600M C3
52.8 kg
600x730x60 mm
Steyr 618/600M
52.8 kg
600x730x60 mm
NSK 68/600M
52.8 kg
600x730x60 mm
NSK 618/600MA
52.8 kg
600x730x60 mm
Neutral 618/600MA C4
52.8 kg
600x730x60 mm
FAG 718/600-MP
51.4 kg
600x730x60 mm
FAG 718/600-MP-P5
51.4 kg
600x730x60 mm
INA SL1818/600-BR-E-CN/3L
51.5 kg
600x730x60 mm
FAG F-622922-01-NF-WPOS
51.5 kg
600x730x60 mm
SKF NCF18/600ECJB/L4BVR684
51.5 kg
600x730x60 mm
SKF NCF18/600V/VQ686
51.5 kg
600x730x60 mm
NSK NCF18/600/S/VCCG2-01
48.9 kg
600x730x60 mm
INA SL1818/600-E
51.5 kg
600x730x60 mm
INA SL1818/600-E-C3
51.5 kg
600x730x60 mm
FAG NCF18/600V
51.5 kg
600x730x60 mm
FAG NU18/600-M1-C3
50.6 kg
600x730x60 mm
FAG NJ18/600-M1
52.6 kg
600x730x60 mm
SKF NU18/600ECMA/HB1C3
50.6 kg
600x730x60 mm
SKF NCF18/600V
51.5 kg
600x730x60 mm
SKF NCF18/600V/C3
51.5 kg
600x730x60 mm
SLF Fraureuth NCF18/600V
51.5 kg
600x730x60 mm
RKB NCF18/600VC NR A ZB
51.5 kg
600x730x60 mm