INA SL1818/1120-E-TB-BR-SP5-CN/3L-IT
Price: 0.00 $
Specifications
| Brand | INA |
| Item Number | SL1818/1120-E-TB-BR-SP5-CN/3L-IT INA |
| Manufacturer Part Number | 0749596203107 |
| EAN | 4064327049902 |
| Category | Cylindrical Roller Bearing Single Row |
| Inner (d) MM | 1120 |
| Outer (D) MM | 1360 |
| Width (B) MM | 106 |
| Inner (d) Inch | 44.0945 |
| Outer (D) Inch | 53.5433 |
| Width (B) Inch | 4.1732 |
| Weight (kg) | 298 kg |
| Bore | C - Cylindrical Bore |
| Seal | No Seal |
| Cage Type | FC - Full Complement, No Cage |
| External Modification | No External Modification |
| Radial Internal Play | Lower Half of Normal Clearance |
| Precision | P5 Precision (Higher than P6) |
| Heat Stabilization | No Heat Stabilization - Temperatures up to 120 °C |
| E | Increased Load Capacity |
| TB | In The Case Of Bearings Of TB Design, The Axial Load Carrying Capacity Of Cylindrical Roller Bearings Was Significantly Improved With The Aid Of New Calculation And Manufacturing Methods. Optimum Contact Conditions Between The Roller And Rib Are Ensured By Means Of A Special Curvature Of The Roller End Faces. As A Result, The Axial Contact Pressures On The Rib Are Significantly Minimised And A Lubricant Film Capable Of Supporting Higher Loads Is Formed. Under Normal Operating Conditions, Wear And Fatigue At The Rib Contact Running And Roller End Faces Is Completely Eliminated. In Addition, Axial Frictional Torque Is Reduced By Up To 50%. The Bearing Temperature During Operation Is Therefore Significantly Lower |
| BR | Black Finished, Factory-Applied Durotect® B Black-Oxide Coating. Durotect B Improves Run-In Behavior And Energy Efficiency While Reducing Surface-Induced Damage To The Bearing, Burnished Race |
| SP5 | Increased Accuracy (Partly P5) |
| CN/3L | |
| CN | Normal Radial Internal Clearance |
| /3L | Clearance Range Corresponding To The Lower Half Of The Actual Clearance Range |
| IT | Inner Ring Mounted Inverted (Turned 180°) |
SKF 618/1120MA/C3
315 kg
1120x1360x106 mm
FAG 618/1120-MA
315 kg
1120x1360x106 mm
FAG 618/1120-M
318 kg
1120x1360x106 mm
FAG 618/1120-MA-C3
315 kg
1120x1360x106 mm
SKF 304203A
285 kg
1120x1360x106 mm
FAG 718/1120-MPB
312 kg
1120x1360x106 mm
INA SL1818/1120-E-TB
298 kg
1120x1360x106 mm
FAG NJ18/1120-TB-MPAX-J30PC
335 kg
1120x1360x106 mm
FAG NJ18/1120-M
335 kg
1120x1360x106 mm
FAG NJ28/1120M
434 kg
1120x1360x106 mm
INA SL1818/1120
298 kg
1120x1360x106 mm
FAG NJ18/1120-MA
335 kg
1120x1360x106 mm
FAG NJ18/1120-MA-C3
335 kg
1120x1360x106 mm
SKF NCF18/1120V
298 kg
1120x1360x106 mm